猛虎出笼分时指标源码（猛虎出笼指标公式）
本文目录一览：
- 1、麻烦老师将下面通达信分时指标做成预警公式 要求 同时出现 虎 出笼 信号选中预警
- 2、麻烦老师把下面通达信分时公式改成预警公式 要求同时出现猛虎出笼信号时预警下面是公式源码
- 3、通达信猛虎出笼分时公式改成预警公式P:=60;Q:=30; A1:=AMOUNT/VOL/100; A2:=(3*HIGH+LOW+OPEN+2*CLOSE)/7;
麻烦老师将下面通达信分时指标做成预警公式 要求 同时出现 虎 出笼 信号选中预警
A1:=AMOUNT/VOL/100;
A2:=(3*HIGH+LOW+OPEN+2*CLOSE)/7;
A3:=SUM(AMOUNT,40)/A1/100;
A4:=SUM(AMOUNT,80)/A1/100;
B1:=DMA(A2,VOL/A3);
B2:=DMA(A2,VOL/A4);
B3:=(CLOSE-B1)/B1*100;
B4:=(CLOSE-B2)/B2*100;
均价:=SUM(C*V,240)/SUM(V,240);
RSV:=(CLOSE-LLV(LOW,Q))/(HHV(HIGH,Q)-LLV(LOW,Q))*100;
K:=SMA(RSV,5,1);
D:=SMA(K,3,1);
J:=3*K-2*D;
VAR2:=EMA(J,6);
VAR3:=(CLOSE-LLV(LOW,21))/(HHV(HIGH,21)-LLV(LOW,21))*100;
VAR4:=SMA(VAR3,13,8);
VAR5:=CEILING(SMA(VAR4,13,8));
VAR6:="SSRP.MA1";
VAR7:="SSRP.MA2";
SIGNAL1:=CROSS(VAR5,VAR2) AND C=均价;
SIGNAL2:=(CROSS(VAR5,VAR2) AND B30.6 AND C=均价);
SIGNAL3:=(CROSS(VAR6,VAR7) AND B30.6 AND C=均价);
SIGNAL1 AND SIGNAL3 AND VAR5VAR2;
{根据分析，“出笼”为红色时胜率比粉色高，粉色过于频繁故不预警。但通达信好像不支持分时预警}。
麻烦老师把下面通达信分时公式改成预警公式 要求同时出现猛虎出笼信号时预警下面是公式源码
A1:=AMOUNT/VOL/100;
A2:=(3*HIGH+LOW+OPEN+2*CLOSE)/7;
A3:=SUM(AMOUNT,40)/A1/100;
A4:=SUM(AMOUNT,80)/A1/100;
B1:=DMA(A2,VOL/A3);
B2:=DMA(A2,VOL/A4);
B3:=(CLOSE-B1)/B1*100;
B4:=(CLOSE-B2)/B2*100;
现价:=C;
分时确认:=MA(REF(HHV(C,60),1),2);
均价:=SUM(现价*V,240)/SUM(V,240);
回调认同:=EMA(EXPMA(C,20),13);
分时压力:=MA(REF(HHV(C,30),1),2);
分时支撑:=MA(REF(LLV(C,30),1),2);
RSV:=(CLOSE-LLV(LOW,Q))/(HHV(HIGH,Q)-LLV(LOW,Q))*100;
K:=SMA(RSV,5,1);
D:=SMA(K,3,1);
J:=3*K-2*D;
VAR2:=EMA(J,6);
VAR3:=(CLOSE-LLV(LOW,21))/(HHV(HIGH,21)-LLV(LOW,21))*100;
VAR4:=SMA(VAR3,13,8);
VAR5:=CEILING(SMA(VAR4,13,8));
VAR6:="SSRP.MA1";
VAR7:="SSRP.MA2";
SIGNAL1:=CROSS(VAR5,VAR2) AND C=均价;
SIGNAL2:=(CROSS(VAR5,VAR2) AND B30.6 AND C=均价);
SIGNAL3:=(CROSS(VAR6,VAR7) AND B30.6 AND C=均价);
XG:SIGNAL1 AND (SIGNAL2 AND VAR6VAR7) {OR (SIGNAL3 AND VAR5VAR2)};
通达信猛虎出笼分时公式改成预警公式P:=60;Q:=30; A1:=AMOUNT/VOL/100; A2:=(3*HIGH+LOW+OPEN+2*CLOSE)/7;
以上就是公式猛虎出笼分时指标源码的全部内容吗猛虎出笼分时指标源码？只有变量常量猛虎出笼分时指标源码的定义而没有满足选股的条件猛虎出笼分时指标源码，如何可能做出预警公式猛虎出笼分时指标源码？
